AMSEC UL1812 UL Two Hour Fire & Impact Safe

**Price is with U.L. Group 2 dial combination lock. Photo above shows Optional AMSEC ESL10XL Digital Electronic lock**

The following is an explanation of the Underwriter's Laboratories' fire resistant container testing procedures on the Class 350 degrees F, one hour and Class 350 degrees F two hour Fire Labels.

U.L. Label/Class 350 F-one hour and Class 350 F-two hour. The safe will maintain an interior temperature less than 350 F when exposed to fire for a period of one hour at 1700 F or for a period of two hours at 1850 F. Safe must successfully undergo all other requirements for the Fire Endurance Test, Explosion Hazard Test and the Fire/Impact Test as stated below.

Fire Endurance Test

After heat sensors and paper are placed inside the safe, the unit is locked and exposed to a uniformly distributed fire. The furnace is regulated to reach a maximum temperature of 1700F for a period of one hour, or 1850F for two hours, then allowed to cool without opening the furnace. The interior temperature is recorded throughout the test and during the cooling period until a definite drop is shown and must never exceed 350F. Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security and the interior examined for visible evidence of undue heat transmission

Explosion Hazard Test

The safe is locked and placed into a furnace preheated to 2000 degrees F. This temperature is maintained for 30 minutes (2 hour test is 45 minutes) and if no explosion results, the unit is allowed to cool without opening the furnace doors. Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security and the interior examined for visible evidence of undue heat transmission.

Fire Impact Test (Manufacturer's Option)

After the explosion hazard test the safe is removed from the furnace and within two minutes is dropped 30' onto a riprap of brick on a heavy concrete base. After impact the unit is examined for deformation, rupture of parts, damaged insulation and any other openings into the interior of the unit. Once cooled, the unit is inverted and reheated to 1550F for a period of 30 min. (2 hour test: 45 min. at 1638F). Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security and the interior examined for visible evidence of undue heat transmission.

Live in the country that's not near a fire department? Have important documents that must be safe from fire? Or do you just want superior fire protection? We have the safe for you!

The AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe is one in a series of 6 sizes, one of the sizes is sure to fit your needs. This safe, designed primarily for home use, conveniently fits into most small places for security and easy access as well.

Fire Protection is paramount in the AMSEC Model UL1812 Two Hour Fire Safe. It carries a U.L. 2 Hour Class 350 with Impact Rating. This means the safe withstands 1850 degree external temperature for two solid hours while the inside temperature does not extent beyond 350 degrees. This is a very severe test and is followed up on by U.L. often. The Impact rating means the safe is heated for 30 minutes at 1500 degrees and then dropped two stories (30') to insure it integrity. This is a Fire Test!

The AMSEC Two Hour Fire Safe with Impact Rating carries a Lifetime Replacement Warranty in the event the safe is exposed to a fire. For more information on the Warranty contact our Security Specialist.

The AMSEC Model UL1812 Two Hour Fire Safe is attractive and appointed very well with a plush velour interior and choice of Sandstone or Granite exterior colors. The door sports a brass ringed combination lock and brown powder coated handle for easy operation of the door. There are also vinyl feet on this model which reduces abuse to floor or carpet.

Theft protection on the AMSEC Two Hour Fire Safe with Impact Rating is apparent by it 3 1/2" thick recessed door with a mitered door jamb. 7/8" locking bolts are activated by an "L" handle and the U.L. Group II key changeable lock is supported by a spring-loaded relock devise activated by a severe attack. There are also heavy duty hinges that allow the door to rotate 180 degrees when opened. Anchor bolts are included at no extra charge. When used these make your safe even more secure.

If you need more space than the AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe we offer 4 more larger sizes. Check out our website or call one of our Security Specialist at 1 800 207 2259 for more information on the additional sizes.

Features:

• The best warranty in the business. Lifetime fire replacement and one year parts and labor.
• U.L. listed Class 350 F two hour fire and impact rating.
• Safes withstand fires of up to 1850 F for two hours and a 30' drop equivalent to falling through a 2 story burning building.
• Increased barriers for burglary protection. Impressive 3-1/2" thick recessed door with 5/8" thick front for excellent pry resistance.
• Handle activated locking mechanism with 7/8" diameter solid steel chrome plated locking bolts offering smooth operation.
• Internal anchor bolt hole with hardware.
• Standard lock is a U.L. listed Group II key dial combination lock with re-locker. 1 million possible combinations.
• Auxiliary spring-loaded re-lock device activated by severe attack.
• Heavy duty steel hinges provide additional security and smooth operation.
• For your convenience, rubber feet are standard on the UL1812. 1" high rubber feet, included in exterior dimension.
• Includes 1 adjustable shelf.
• Attractively accented with a brass-plated dial, brown powder coated handle, decorative emblems and plush velour interior.
• Available in durable Sandstone or Granite textured finishes. Sandstone comes with Brass hardware; Granite comes with Chrome hardware.

ORDER CONFIRMATION

As soon as your order is placed, you will receive an order confirmation e-mail. (If you do not, please contact us and a representative can send over the digital receipt of your purchase). This confirms your order has been received in our system and your credit card is authorized for purchase.  As soon as we receive your order, we begin processing to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will reach out to you via e-mail to confirm if you'd like to keep your order or cancel for a full refund.  If your item(s) are available for immediate shipment, we will process the charges and submit the order for shipment.

ORDER SHIPMENT

Please reference your product page specific lead times. After shipment, items will arrive in 2-7 business days.

Certain items due to high demand and low supply can only be placed on back order at specific times. Please contact customer service to hear about any items availability.

Please contact us for rush shipping rates and options. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  If you do not receive tracking information from us within four business days of your order, feel free to follow up with us at support@advantgarage.com.

Large items that ship via freight (not UPS or Fedex) require a signature upon delivery. You will receive a call from the shipping company to arrange a time and day for delivery that works for you.

PRODUCT QUALITY GUARANTEE

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should REFUSE the package, and make note of it on the delivery receipt.  If your item(s) do arrive damaged, please contact us immediately and send photos to support@advantgarage.com . We will process an insurance claim on your behalf and happily work with you to resolve the issue and refund or replace your order.